Tel: +44 1457 867777
 email: Sales

home > technical enquiry
Technical Enquiry Form

Information policy - The information you provide in the form below will be used by Maelstrom APT only for the purposes of contacting you in response to your enquiry.  This information will be used for NO OTHER PURPOSE and will not be passed on to any third parties.

When you have submitted your enquiry, an automated e-mail will be sent to you with a copy of all of the information you have provided, for your records.

* = Required field

Name:*
Job Title:
Company:*
Address:*
City:*
State or County:
Zip or Postal Code:*
Country:*
e-mail *
Telephone:
Fax:
Preferred contact: e-mail     phone      post
Areas of interest:

(please check
all that apply)

 Integrimix - Integral Pump Mixers (IPM)
Distromix High Shear - Fluid Division Mixers (FDM)
Distromix Low Shear - Fluid Division Mixers (FDM)
Elastomix - High Stress Mixers (HSM)
Ultramix - Controlled Deformation Dynamic Mixers (CDDM)
Enquiry or Comments:

Additional Application Notes (Optional)
It would help us to provide you with more relevant information if you could tell us something about your fluid mixing application.  You can supply as much or as little of the following data as you wish but please bear in mind that at least this data will be needed before a specific machine can be proposed. 
Mixing type: Powder/liquid dispersion
Emulsification
De-agglomeration
Wet milling of solids
Blending
Size range: Laboratory
Pilot or small production scale
Full production scale
Process type: batch   inline single pass   inline recirculation
Reason for Enquiry: New application or process
Direct replacement for existing mixer
Improvement to existing process
Problems with existing mixer
Material 1:
(at start)		 Name/type:
Percentage of total mixture:  %
Solid       Particle size:um  mm
Liquid      Viscosity:    cP
Material 2:
(at start)		 Name/type:
Percentage of total mixture:  %
Solid       Particle size:um  mm
Liquid      Viscosity:    cP
Material 3:
(at start)		 Name/type:
Percentage of total mixture:  %
Solid       Particle size:um  mm
Liquid      Viscosity:    cP
Final result: Total volume (if batch process): L    gals 
Total flowrate (if inline process): L/hrgpm 
Particle/droplet size: um  mm
Viscosity: cP
Other characteristics:
Vessel or system pressure: bar  psi
Mixing temperature range: Min:   Max:  ºC  ºF
Special features: Hygienic (food / drink / pharmaceutical)
Hazardous area (flameproof, ATEX)
Vacuum
Powder addition system required
Dosing and metering
Abrasive and/or corrosive materials
Toxic materials
Additional Information:
Please provide any extra information you think relevant below.

Thank you.  Please click on the 'Submit' button below when you are done.

 

 © Copyright 2000-2008 Maelstrom Advanced Process Technologies Ltd., England.
     All rights reserved.  All trademarks acknowledged.  Disclaimer Notice 		Contact     About     Products     Technologies    Primer
Links    FDM Video    IPM Video     News    Map   Site Map